服务热线:

400-8287-806

当前位置:主页 > 新闻资讯 >
联系我们contact us
咨询热线400-8287-806

常州市蓝阳涂料有限公司

联系人:孙经理

手机:139 1230 3932

邮箱:554903131@qq.com

地址:常州市天宁区郑陆镇工业园区

联系我们.JPG

新闻资讯
分享至:

环氧地坪夏季施工为什么会出现色差?

作者:admin   发布日期:   点击数:次
环氧地坪漆以耐磨,抗压,防尘防潮,地表清理方便,表明光泽持久等著称,漆膜坚韧,耐磨性好,施工安全省心,在实验室,停车场,工程无锡环氧地坪,办公楼,医院,车间等场合都被广泛使用。 炎热的夏季进行环氧地坪施工总会遇到各种各样的问题,比如地面色差和接茬影响地面美观性。今天上海诚镭和大家分享为什么环氧地坪夏季施工会出现色差 。

Epoxy floor paint is famous for its wear resistance, compression resistance, dust and moisture proof, surface cleaning convenience, indicating durable gloss, tough film, good wear resistance, construction safety and safety. It is widely used in laboratories, parking lots, engineering floors, office buildings, hospitals, workshops and other occasions. The construction of epoxy flooring in hot summer always encounters various problems, such as ground color difference and stubble affecting the aesthetics of the ground. Today, Shanghai Chengzhao shares with you why the color difference of epoxy flooring construction occurs in summer. 环氧地坪可不是图案设计的哦,是环氧地坪施工不当导致的色差和接茬问题。出现这种现象的原因是因为夏季天气颜色,环氧地坪漆固化较快,通常25-35分钟就固化了,环氧面漆施工时因为施工间隔时间太久导致的地面色差,还有一个原因是因为环氧地坪漆储存不当导致环氧环氧地坪漆变质,施工后出现地面斑驳色差。

Epoxy flooring is not a design, it is the color difference and stubble problem caused by improper construction of epoxy flooring. The reason for this phenomenon is that in summer weather color, epoxy floor paint solidifies quickly, usually in 25-35 minutes. The color difference of the ground caused by the long construction interval during the construction of epoxy floor paint is also due to improper storage of epoxy floor paint, which causes the deterioration of the epoxy floor paint and the appearance of the ground after construction. Spotted color difference.

夏季环氧地坪漆施工避免出现色差的操作:夏季气温高,应该将无锡环氧地坪漆存放在阴凉的地方,不能接受太阳暴晒;环氧地坪面漆施工时必须连续施工,不能间隔,这样就能避免环氧地坪地面出现色差。

Summer epoxy floor paint construction to avoid the operation of color difference: high temperature in summer, epoxy floor paint should be stored in a cool place, can not accept the sun exposure; epoxy floor paint construction must be continuous, can not be spaced, so as to avoid color difference on the epoxy floor.